Rockwell Cum Brinell Hardness Testers
Rockwell Cum Brinell Hardness Testing Machines
|
|
| |
 |
Rockwell Cum Brinell Hardness Testers
Rockwell Cum Rockwell Superficial Hardness Testing Machines ( Model : MSM ) |
|
Rockwell Cum Brinell Hardness Testing Machine is a combined hardness testing machine used to measure hardness of metals & alloys of all kinds, hard or soft, whether round, flat or irregular in shapes. |
|
Rockwell Cum Brinell Hardness Testing Machine is ideally suitable for laboratories, tool rooms, Heat treatment shops, R&D departments, inspection departments, casting & forging industries, educational institutions. |
|
Rockwell & Brinell method is used for checking hardness on metals & alloys of all kinds. |
|
Brinell hardness is also checked on non-ferrous materials like Cast iron, Alluminium, etc. |
|
Automatic weight selection with automatic zero setting dial gauge. |
|
Rockwell test minor load is 10 kgf & major loads are 60,100,150 kgf. Brinell test for Model : MRB major load is 187.5 & for Model : MRB-250 are 187.5, 250 kgf. |
|
Rockwell hardness scales such as HRA, HRB, HRC, etc. Brinell hardness scale such as HB is obtained by using different types of indentors ( Diamond / Ball ). |
|
For Model : MRB, Test height x Throat is – 215 x 132 mm. For Model : MRB-250, Test height x Throat is – 295 x 148 mm. |
|
Motorized versions are also available. |
|
Machines strictly conforms to IS:1586- 2000 for Rockwell test, IS:2281, BS:240, ASTM-E-10 for Brinell test. |
|
|
| |
Technical Specifications Of Rockwell Cum Rockwell Superficial Hardness Testers (in bold) -
|
Model |
MRS |
MRS-150 |
MRB |
MRB-250 |
MSM |
Test Loads (Kgf) |
60, 100, 150
(Rockwell) |
60, 100, 150
(Rockwell) |
60, 100, 150 (Rockwell)
187.5 (Brinell) |
60, 100, 150 (Rockwell)
187.5, 250 (Brinell) |
60, 100, 150 (Rockwell)
15, 30, 45
(Rockwell Superficial) |
Initial Loads (Kgf) |
10 |
10 |
10 |
10 |
10 (Rockwell) &
3 (Rockwell Superficial) |
Max. Test Height (mm) |
215 |
295 |
215 |
295 |
295 |
Depth of Throat (mm) |
132 |
148 |
132 |
148 |
148 |
Max. Depth of Elevating Screw Below Base (mm) |
230 |
295 |
230 |
295 |
295 |
Size of Base (mm) (Approx.) |
430 x 180 |
475 x 220 |
430 x 180 |
475 x 220 |
475 x 220 |
Machine Height (mm) |
635 |
865 |
635 |
865 |
865 |
Nett Weigth (kg.) (Approx.)S |
65 |
106 |
70 |
125 |
120 |
|
| |
Standard Accessories - |
Model |
MRS |
MRS-150 |
MRB |
MRB-250 |
MSM |
Rockwell Diamond Indentor |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
Superficial Diamond Indentor |
-- |
-- |
-- |
-- |
1 No. |
Testing Table f 50 mm |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
Testing Table f40 mm with ‘V’ Groove for round Jobs f 6 to 45 mm |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
Steel Ball Indentor f1/16” |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
Steel Ball Indentor f2.5 mm |
-- |
-- |
1 No. |
1 No. |
-- |
Steel Ball Indentor f5 mm |
-- |
-- |
-- |
1 No. |
-- |
Test Block HRC |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
Test Block HRB |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
Test Block HB 2.5mm/187.5 Kgf |
-- |
-- |
1 No. |
1 No. |
-- |
Test Block Rockwell Superficial 30N |
-- |
-- |
-- |
-- |
1 No. |
Steel Ball f1/16” |
5 Nos. |
5 Nos. |
5 Nos. |
5 Nos. |
5 Nos. |
Allen Spanners |
3 Nos. |
3 Nos. |
3 Nos. |
3 Nos. |
3 Nos. |
Clamping Device |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
Brinell Microscope |
-- |
-- |
1 No. |
1 No. |
-- |
PVC Cover for Machine |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
Rubber Bellow |
1 No. |
1 No. |
1 No. |
1 No. |
1 No. |
18. Instruction Manual |
1 Book |
1 Book |
1 Book |
1 Book |
1 Book |
|
|
